Wolverine setup jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts for setting up a OneWay Wolverine base.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You may not need to use it very often, but boy does it speed the job up when you do! Getting the perfect alignment for your OneWay Wolverine grinding jig can be a pain. These 3D printed parts take all the guess work out of it. The two posts go into the jig base which gets the front of the base perfectly flush with the grinding wheel. A tick mark at 6.25" let's you verify you are in the proper height range recommended by OneWay. The arms then go over the wheels to give the base perfect front-to-back alignment with the wheel. Arms come in 1" or 1.5" versions for various wheel sizes. Works with 6" or 8" grinder setups. 1" version comes with long and short arms to accommodate 6" wheel setups.
https://www.etsy.com/listing/1338356391/oneway-wolverine-alignment-jig