CM1000 Wall Mount Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple jig to easily wall mount your CM1000.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
A quick printing jig to make the mounting of mkingery's Netgear CM600 / CM1000 Wall Mount quicker. I was installing my CM1000 on the underside of a shelf and was having trouble lining everything up. Designed in Fusion 360 and printed on a CR-10 Mini, the middle section is wide enough for a piece of ½" double sided tape. Should print in about a half hour at 0.28mm layer height. I only have a CM1000, so I'm not sure if this jig works with the CM600 as well, but if its the same height it should work.
Not sure if this really qualifies as a remix, but I figured it'd be more likely to be seen by the folks that need it this way. Thanks to mkingery for the excellent original design!