1 / 1

Dreidel with Easy-Spin Stand for Kids

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This dreidel works by itself, or with the easy-spin stand for children to use.

Aktualizacja u źródła: 23 gru 2022

Informacje o modelu

This is a dreidel (sevivon) for your next Hanukkah party!

The base dreidel comes in several variations, based on 3 features (8 models in total):

Diaspora version (D): The D versions have a shin (ש) instead of a pe (פ). In some traditions, the pe is used in Israel whereas the shin is used outside of Israel.
Screw mount (S): The screw mount is for use with the easy-spin stand. This is a great way for small children to spin the dreidel without it flying across the room. It will also spin fairly well without the stand.
Pointy bottom (P): The bottom can be pointy or smooth. I recommend the smooth one for smaller children, although it doesn't spin as well.

You can look for these letters in the filename to pick the right one.

Print the dreidel as oriented in the .stl file (upside down). You shouldn't need any supports.
Print the handle as oriented in the .stl file (upside down). You may need a brim, which is included in the .gcode file.
Use a drop of super glue on the threads as you attach the handle to the dreidel. It's probably not going anywhere.

You can print the optional Easy-Spin stand and use it with the screw mount dreidels. Choose either the 50 mm or 80 mm diameter.
To install: thread the dreidel onto the stand, and after a few turns it will drop into place.
To remove: lift the dreidel up until it reaches the threading, then unscrew it.

The dreidel has rounded edges to make it a bit safer, though supervision of children is always required.
The pointy versions are… well… pointy. Not recommended for small children.
The handle by itself is a choking hazard for small children. Make sure to glue it well so it can't be removed.