Juwel Twist 140 Drying Rack Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Juwel Twist 140 folding drying rack.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement wall mount for Juwel Twist 140 foldable drying rack.
Mounting material
Countersunk model
Use universal screws with countersunk head and a diameter of 4mm, so that the screw head is around 8mm.
I used 4x40mm universal screws with countersunk head.
Counterbored model
The counterbored model is a direct replacement part for the original Juwel Twist 140 wall mount.
Therefore it can be used with the original screws, which are 4x30mm flat head screws.
Print settings
- Layer height: 0.2mm - 0.3mm
- Perimeters: 2 - 3
- Infill
- Density: 15% - 20%
- Pattern: Gyroid
- Supports: Everywhere
- Suggested material: PLA, ABS, PETG, PC
I used PLA with a 0.6mm Nozzle, 0.3mm layer height, 2 perimeters, 15% infill density, gyroid pattern and supports enabled.
In Prusa Slicer 2.5.0 the estimated print time is 47 minutes.