Juwel Twist 140 Drying Rack Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Juwel Twist 140 folding drying rack.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement wall mount for Juwel Twist 140 foldable drying rack.
Mounting material
Countersunk model
Use universal screws with countersunk head and a diameter of 4mm, so that the screw head is around 8mm.
I used 4x40mm universal screws with countersunk head.
Counterbored model
The counterbored model is a direct replacement part for the original Juwel Twist 140 wall mount.
Therefore it can be used with the original screws, which are 4x30mm flat head screws.
Print settings
- Layer height: 0.2mm - 0.3mm
- Perimeters: 2 - 3
- Infill
- Density: 15% - 20%
- Pattern: Gyroid
- Supports: Everywhere
- Suggested material: PLA, ABS, PETG, PC
I used PLA with a 0.6mm Nozzle, 0.3mm layer height, 2 perimeters, 15% infill density, gyroid pattern and supports enabled.
In Prusa Slicer 2.5.0 the estimated print time is 47 minutes.