Bed Supports Ender 5 & Ender 5 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and solid bed reinforcement brackets for the Ender 5 and Ender 5 Pro
- Ocena
- 4,667 / 5
- Polubienia
- 274
- Pobrania
- 2435
- Wydruki
- 19
- Wyświetlenia
- 9674
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Bed reinforcement brackets for the Ender 5 and Ender 5 Pro in order to reduce vibrations and make the bed more stable.
Advantages over other models:
- stronger if print correctly (see below)
- less material - less weight
- no Z losing
PRINTING
Material: because parts of brackets are close to the heated bed I highly recommend using a heat resistant filament like PETG or better. I used PA CF15.
Orientation: rotate the parts 45 degree and print them like this:
Settings: min 4 perimeters (for 0.4mm nozzle), 25%+ infill, no supports, infill angle 0 (very important!).
POST-PROCESSING
Use a drill or a screw to break the holes.
MOUNTING
BOM for 2 supports:
- 8x M5x30 socket head cap screw
- 8x M5 nuts
IMPORTANT: don't over tight. You can damage the bearings and the smooth rods!
After installation verify if your Z works smoothly.
Use a zip tie to secure the brackets to the bed frame.
UPDATES
06.07.2024 - Change the radius for bearings from 9.70mm to 9.50mm
19.08.2023 - Change the radius for bearings from 10.00mm to 9.70mm