Bed Supports Ender 5 & Ender 5 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print and solid bed reinforcement brackets for the Ender 5 and Ender 5 Pro
- Rating
- 4.667 / 5
- Likes
- 274
- Downloads
- 2,435
- Makes
- 19
- Views
- 9,674
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bed reinforcement brackets for the Ender 5 and Ender 5 Pro in order to reduce vibrations and make the bed more stable.
Advantages over other models:
- stronger if print correctly (see below)
- less material - less weight
- no Z losing
PRINTING
Material: because parts of brackets are close to the heated bed I highly recommend using a heat resistant filament like PETG or better. I used PA CF15.
Orientation: rotate the parts 45 degree and print them like this:
Settings: min 4 perimeters (for 0.4mm nozzle), 25%+ infill, no supports, infill angle 0 (very important!).
POST-PROCESSING
Use a drill or a screw to break the holes.
MOUNTING
BOM for 2 supports:
- 8x M5x30 socket head cap screw
- 8x M5 nuts
IMPORTANT: don't over tight. You can damage the bearings and the smooth rods!
After installation verify if your Z works smoothly.
Use a zip tie to secure the brackets to the bed frame.
UPDATES
06.07.2024 - Change the radius for bearings from 9.70mm to 9.50mm
19.08.2023 - Change the radius for bearings from 10.00mm to 9.70mm