1 / 7
Sunlu / Tecbears Fila Dryer S2 - Filament Trockner S2 — zdjęcie 1
1 / 7

Sunlu / Tecbears Fila Dryer S2 - Filament Trockner S2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a wall mount remix for the Fila Dryer S2

Ocena
5 / 5
Polubienia
58
Pobrania
399
Wydruki
9
Wyświetlenia
3379
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I edited the original file a bit so that there is also a chamfer on the right side.
I also designed a right and a left angle to mount the filament dryer on the wall.

 

you will need 5mm bolts and nuts to connect the base to the wall brackets

 

  • Rafts: NO
  • Supports: NO
  • Nozzle: 0.4
  • Resolution: 0.28
  • Infill: 15% 
  • Walls: 3
  • Material: PLA+

Tagi