141 modeli
So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…
Dryer rack that fits like a spool inside your Sunlu Filadryer S1 Plus/S2. Gaps are 1mm wide so your Silica Gel beads wont fall through. Works well with bags and loose beads. Depending on what material you print with you can crank up the…
Tiny Part, Big Upgrade – TPU PTFE Adapter Hey maker! 👋 This small TPU adapter makes a big difference: Features: Replace your old PTFE piece with this adapter. Insert a standard 4mm PTFE tube, held securely by friction. Quick, tool-free…
It looks like there is room to put a fan on the back panel, but this was much easier. Update: New version stays on dryer and doesn't fall off. Update 2: Filament guide version
Those who pre-ordered the Sunlu FilaDryer S2 quickly discovered you need to prop open the lid slightly to release humidity. I've been using a simple binder clip but decided to design a part to do the trick.
SUNLU FilaDryer S4 Desiccant Holder. FilaDryer S4 comes with two spots that allow for desiccant. I was worried the desiccant would fall through the slots in the container so I created a smaller container that fits in place that has 2mm…
Mounts a Sunlu Filadryer S1 to the side a Flashforge Adventurer 5M (not pro). Replaces parts Guard Plate A2 (lower front) and Guard Plate D2 (lower rear) of the Enclosure for Adventurer 5M from Flashforge wiki. Does not require full…
Sunlu Filadryer Filament Guide to aid smooth movement of filament when the dryer is placed above the printer i.e. on top of an enclosure. Youtube Video Here https://youtu.be/jmD6SlTSWTo Print the threaded part with the thread face on the…
Filadryer S1 PTFE fitting with screws I created this because the other PTFE fitting mounts without drilling holes were very flimsy and broke easily. This allows you to add a M6 PTFE fitting to your box which is very rigid and you just…
While the S2 is a good idea in principle, it has some drawbacks - the two filament exits in the shell are quite steeply angled, which does not work well when printing from it sitting at the same level as the printer itself. Additionally,…
This is a remix of the Sunlu FilaDryer S2 Improvement Wedge by VoltexRB with a wheel for the filament. So I can remove the spool from the dryer without having to cut the filament. Just flip the wedge if you need the filament to go down…
Desiccant holder/container for Sunlu_FilaDryer S1. Mainly intended for silica gel in it's free form, i.e. grains, each about size of 2.7mm at least. "Pouch version" is meant in case someone want to use it with desiccant pouch (it is the…
The S2 version of the dryer goes up to 70C, so I figured this is enough to dry reusable silica gel or even annealing PLA prints. This tray goes on top of the rollers so that things don't touch the heater directly. Fits both of Sunlu's…
PTFE Mod for SUNLU FilaDryer S2 attached with screws and using a bigger hole in order to get better filament pull angle. Use the dill jig for making the two 3mm holes and then extent the original hole to 8mm. Best print sidewards as…
For bowden fittings that allow the tube to pass through it also allows for easier loading of the filament than. through the hole. Printed in PETG with 0.4mm nozzle and 0.2mm layerheight. No supports, drilling, or threading needed for the…
A wall mount for the Sunlu S2. Needs a couple of 4mm or so screws to attach to the wall, and a pair of 40mm m8 nuts and bolts (though you can get away with a longer single m8 bolt if you want). Also needs 4 M3 brass inserts to hold the…
This hole plug is specialized and designed for SUNLU FilaDryer S4. To prevent the moisture re-flow into the filament dryer. SUNLU FilaDryer S4 is a powerful filament dryer with the capacity of 4 spools of filaments and is compatible with…
A desiccant box for Sunlu Filament Dryer s4. It can hold about 25g of silica gel and has a handle to place it in and take it out of the filament dryer and It's an easy and fast print. PRINT WITH YOUR TOUGHEST FILAMENT!! I use my filament…
This hole plug is specialized and designed for SUNLU FilaDryer S4. To prevent the moisture re-flow into the filament dry
Two separate bracket parts to attach Sunlu S2 Filadryer to Skadis. I first printed ones with Skadis hooks, but hooks were too weak printed in PLA. Also more difficult to print, so I made another version which attaches to Skadis plate with…
Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…
I absolutely love my SUNLU FilaDryer S4. Using it to dry filaments (of course) all the time and as a filament holder when printing from a side of AMS. But there is one very annoying me thing about it. Especially if I print out of it and…
EDIT: as suggested by @ 3D_print_de I added a split version so that it can be printed on the Prusa Mk3s and other 21cm format printers. The shelf has cutouts for the wire to drop as straight as possible, and in the corners in case you…
M10 size adapter in stead of M6.
I was not satisified with how wobbly the Sunlu Filadryer S2 was so I made this base up to add more surface area. Unscrew the bottom part holding the feet and then use longer screws through the base to hold it in. I used 3.5x20 screws for…
Anti Vibration Feet for the Sunlu S4 FilaDryer to minimize noise and vibrations. Best printed with TPU. It also works with PLA and PETG if you stick an absorber pad on the foot. The surface of the foot is better suited for a shock…
Requires a pair of M3 screws to assemble. (Use at least 16mm length, but longer lengths should be fine.) A single M4 or M5 screw + T slot nut can be used to hold it to the extrusion, but this probably isn't necessary if you don't expect…
A wedge for the Sunlu filament dryer S2 to open the case a little to let the humidity out (around 5mm). I printed it without support and it turned out fine. Make sure to print it with a heat-resistant material for your use case. I used…
This model is a Remix of a hygrometer mount - made by Nkitani - specifically designed for the Sunlu S1 Filadryer / Jayo S1. One of the features of this remix is that it can be printed without the need for supports, making the post process…
I liked the original minimalist design of the wedge, but ran into some issues with it not staying secured to the Bowden tube and the dryer itself, so I added 2 set screws for holding onto these parts. I also added a M6 tap for a Bowden…
I flipped the connector 180 so I could bottom feed and point the tube upwards. Added an M10 version (untested)
Bracket for SUNLU FilaDryer S1 Use 4 x M4x12 mm Allen screws and 4 t-nuts M4 to mount on your Ender Printer (20x20mm profiles) Print with support 'Buidplate only'. Suitable for assembly left or right, front or back of printer Category: 3D…
SUNLU S1 Drybox Stop for cover! No screws no glues no tapes! Like my design for support thank you! Post-Printing Category: 3D Printing
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Functional plugs for your Filadryer S1 Plus. There are four different plugs available to suit your needs: front-plug.stl - Completely seals the front hole (and won't get lost as easily as the stock plug) front-plug-with-guide.stl - Like…
a small plug to replace the ptfe if you dont run filament through it. to withstand the temperatures inside of the drybox i would reccomend printing with petg or abs
Bowden connection between Prusa Mini plus and Sunlu filadryer s2. Bowden 4mm/2mm circa 500mm. Increase hole diameter to 12mm. And cut plastic housing inside by 5mm or so to make enough room for bowden (see attached pictures). Hole in the…
Wall mount for Sunlu S2 Mk3S Mount by @mikeev_167360. Attach with short 4 mm wood screw (i use 4x20).
I've found that the S2 filament dryer from SUNLU functions better if left open a small amount, giving the humidity a chance to escape. Without it the humidity sensor for me would report values between 25-30%, with it I typically see 15-20%.
"Wet filament is the enemy. An enemy deserves no mercy." - Cobra Dri Karate chop moisture from your filament by combining the heat from your SUNLU FilaDryer S1 and the air circulation and desiccant storage provided by the Cobra Dri! The…
Allows you to mount your Sunlu FilaDryer on the back or side of a Voron V2. Screen and cable cutouts are on both sides so you can choose where best suits you to mount it. Requires at least 3 M5 screws (14mm should work, though 16mm can do…
This is a print-in-place cover for the S2's screen. I have attached mine with some hot glue, but others have attached with a command strip. Velcro might also be another option. I would HIGHLY suggest printing in a dark color filament (I…
The Sunlu FilaDryer S4 is a great filament dryer but the fans are extremely loud @ ~52 db from 1 foot away. I recently replaced the 3x 6020 fans to 12v GDSTime 6015 fans which lowered the sound level to a more tolerable ~41 db, with no…
An adapter to fit small 250g spools into the Sunlu FilaDryer S4 Features Perfectly mounts into your FilaDryer S4 Fits most 250g spools High stability Recommended print settings Layer height: 0.2mm Heat resistant materials are suggested…
Also has a notch so if you print and install the new spool holder side, it will clamp securely to the new 4mm thick gap on the bottom so you can use it without the dryer and it won't fall off. Edit: Raised shelf to align better with…
Vent mod for the Sunlu Filament dryer S2 with adjustable opening. Print the cut layout piece first to mark out where to cut on the lid and where to drill the holes. Bolts are M3x10 with a nut on each. I recommend removing the lid entirely…
The original S2 base was missing a chamfered edge. Johination fixed the missing chamfer in their remix. Now the problem is the base is too large to print on a Prusa MINI+, so I split it in half. Removed the text as well, thinking that it…
SUNLU FILADRYER S1-V2 STOP FOR COVER!
Box zum trocknen von Silica im Sunlu Filadryer S4. Innen befindet sich ein Kanal der die warme Luft vom Lüfter im Filadryer durch die Box leitet und so das Silica schneller und effizienter trocknet. Mit Griff zum herausheben und eine Ecke…
Sunlu FilaDryer S4 Exstension for 4 extra rolls. Made it in 3 parts for easier printing. for no overhang. 608 bearing for rollers. i used 10pcs 10mm long PTFE Tube for alignment. and silicone glue.
I slightly reduced the opening of the door so that not much heat escapes, but so that it is enough to remove moisture. The PTFE tube is a little visible from above, but that doesn't matter at all, it's around the corner. The reduction is…
you need (if you want) of 4 small zip-ties print in TPU for the vibrations
When I upgraded from a MK3S+ to a MK4, the increased speed and mass of the X-axis made my enclosure shake so much that my Sunlu FilaDryer S2 nearly walked itself off the top! So I made this holder, which screws through two free holes in…
I bought a Sunlu FilaDryer S4 and it came with a missing bearing roller. Their support promised me to resend it (they lied, it didn't arrive in 4+ months) and ignored my messages when i asked about the package; they finally answered when…
SUNLU FilaDryer S1 [UPDATE] I made a version 3 where the back of the fan holder is closed and there is a small indent for the power cable to route through. For a much cleaner look ;) Also added a G-code file for a Prusa MK3S+ with eSun…
Summary (updated) I liked the Sunlu FilaDryer S1 3D Printing Mate design and appears to be well designed, but product needs more work! They need to look at filament output with a modular output option. Should have a small (but quiet)…
The Sunlu FilaDryer S1 is an economical way to get a filament dryer, but not a great performer out of the box. As the heat is concentrated at the heating element at the bottom of the dryer, it's normal to see temperatures 15-20C cooler at…
Fan duct for Sunlu FilaDryer S1 improving hot air circulation in the chamber, hold in place with magnets - no holes in cover. Print in PETG / ABS. PLA won't resist 55C and duct will deform. Hardware required: Fan 4010 5V / 12V / 24V x1…
Tiltable Print without support Clean the hold with a 4mm drill bit if needed
If you want to see my best projects, I invite you here: https://cults3d.com/en/users/Guliwer06/3d-models (EN) Hello Here is my solution to the problem of the sunlu s2 dryer's poor filament drying power. To build this upgrade you need:…
The Sunlu Filadryer S1 is designed to only hold standard 1kg spools, but with this adapter you can also use smaller spools, like the 250g sample spools sold in 8-packs by Sunlu. The adapter raises the small spools high enough to easily…
Requires four 8mm wall anchors to fix Requires a cable with 90 degree connectors -print in PTEG -infil 25%
Fast printing Silica Gel containers that fit in 53mm centre hole of Filament spools from Addnorth. Remixed to get taller version to maximize size when used within Filadryer S2. Credits go to TORX1 on Thingiverse for the brilliant fast…
(old 2021 design imported from Thingiverse) Edit 2022-01-20: * This is designed for flexible filament! Do not print in PLA, it won't work.* See the remixes if you want a rigid version.** I wanted to use a 4010 blower instead of a larger…
SUNLU FilaDryer S4 Desiccant Holder with target of max volume for desiccant with a lid. The still cover fits, it's tested but i didn't take pictures.
Here’s a plug/bung for the Sunlu S4 Filadryer—Filament Dryer. I misplaced mine in a "safe" spot and couldn’t remember where, so I searched for designs online. I found one that looked nice, but it didn’t fit at all. So, I decided to create…
The base mount will be supported by two of the holders. All of them are hold in place by M5 screws and hammer nuts. Both holders need to be in place, before the bigger part, other wise the holder can not be screwed on your frame. Also put…
Sometimes when spool is almost empty, it gets out of the roll axis inside the Sunlu FilaDryer and it blocks preventing filament to unroll. As a consequence of this event the printed item gets corrupted. In order to avoid this unwanted…
FIXED! Hygrometer Holder for SUNLU FilaDryer S1 V1.3 This project is beta version update 23/4/22 Recommend print with PETG it is not recommended to print with PLA because it melts. If you print with PLA you need to add 1mm cork at the…
This is a holder for the Sunlu Filadryer with a snug fit under the X1C. The hole is for the cable but doesn't match my setup.
I just changed the thread to M6
Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…
I was inspired by Daniel Stahovic's video on YouTube https://www.youtube.com/watch?v=6FG4O5l9XpE&t=8s For my SUNLU filament drybox (S1) I created a holder so I could add a Hygrometer and tempsensor inside the box. The filament is still…
Introducing the ultimate base stabilizer for your SUNLU filament dyer! Designed with the precision of a cat owner tired of feline-induced chaos! Say goodbye to precarious perching and hello to purr-fect stability. With this base…
0,2mm PLA geht, empfohlen wird jedoch PETG oder Temperaturbeständiger.
Summary says it all. Ditch the open spool reels with the Infinity Flow and keep your filament inside the Filadryer instead. Works well with the filament booster for the Sovol SV08 Max. This configuration should also work for tons of other…
Merge between Sunlu FilaDryer S2 Improvement Wedge and UBBI - See remixes
This part fits inside the Sunlu Filadryer S1 drybox and acts as a nut for a PTFE guide fitting. Use of any 4mm OD nominal hose fitting should work, you may need to enlarge the hold on the drybox in order to make sure you fitting passes…
I loved the idea of an LCD cover when I came across the excellent original design by foglie0p but the vertical orientation and the crazy wobbly feet made me think it would slip off easily. So….I Dr. Frankensteined a hinge on it!! A little…
I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…
Needed a way to route the filament from the dryer on top of my enclosure to the printer below it. Made 2 versions, with the bearing positioned below the “stand” and one above it (i use it with dual bearings). The arm sticks to the dryer…
REMIX Prusa Enclosure holder for Sunlu FilaDryer S2 with PTFE tube guide
Auxiliary piece to guide the pfte tube through the closing door of the FilaDryer S2, reducing friction with the walls. There are two exit options: · Horizontal, picking up the filament from the top back · Vertical, picking up the filament…
a better know for your S4
A little remix of Theo2022's stylish SUNLU FilaDryer S1 bracket. The remix requires no printed supports, however additional hardware and the use of glue is needed. The following components can be selected: component_side-front - the…
After studing and testing various ventilator solutions for Sunlu S1 I settled to Cobra Di by Hemi345 , as it provided a nice integration of a silent ventilator and an integrated dessicant holder. I initially modified its dessicant entry…
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware…
Ankermake M5 mount for Sunlu FilaDryer S1
I've modified original model by 10suo. That model didn't fit on my print bed, which is why I cut it in half.
If you get annoyed by the backlight of the LCD on the SUNLU filadryer V2, look no further. Here is a fast and easy print to cover up the LCD and stop the backlight of the LCD blind you at night.
The original knobs are terrible. Probably because they don't want to increase the height of the device to keep packaging costs low. Anyways, print two and slide them on for much more pleasant user experience!
Required: PTFE Tubing Length of Your Choosing(4mm OD x 3mm ID) 8-32 x 0.5in OR M4 x 12mm Screw (model available for both) 1in Wide, Heavy Duty Double Sided Tape 0.15mm Layer height (recommended to maintain printed threads) I was looking…
FAN for Filament Dryer S1 It is FAN holder for better heat distribution on drybox. There are two wariants. One version with step-down cirquit and second without. It allow to use 12V 4010 fan on 24V power supply. I am using 12V SUNON…
Sunlu Filadryer Front plug/feed. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.12 Infill: 100% Filament: 3d Solutech TPU translucent yellow Notes: I used TPU, with 2% supports that i cut out…
Similar to another user on here, my Sunlu S4 dryer was missing all of the filament rollers when it arrived. I didn't feel like dealing with Amazon or Sunlu's crappy customer service, so I came up with my own solution. This design uses a…
I thought the design was great, but the double-sided tape came off quite easily, so I decided to add a few screws
I search a holder for the https://www.printables.com/de/model/309871-sunlu-tecbears-fila-dryer-s2-filament-trockner-s2 to place behind my housing. So I decide to generate a own one. Attached the scad file, if you want wo change something.…
Print with ABS, i used a 0.6 Nozzle but 0.4 should work too. To get the Grid use a modifier Cube: top_shell_layers: 0 bottom_shell_layersr 0 sparse_infill_patter: grid sparse_infill_density: 40% infill_wall_overlap: 300% After the print…
