Skadis Shelf for Sunlu Filadryer S1

EDIT: as suggested by @3D_print_de I added a split version so that it can be printed on the Prusa Mk3s and other 21cm format printers.

The shelf has cutouts for the wire to drop as straight as possible, and in the corners in case you want to mount it in the corners of the peg board where the wall hanging fixtures would be in the way.

I designed the shelf to be supported by three brackets from the awesome collection of PenguinNinja here:

https://www.printables.com/model/109245-bracket-and-shelf-collection-for-skadis-over-200-f

For simplicity I am enclosing here the specific one I used in my own build, “Straight supported bracket with endstop - 95mm”, but any equivalent bracket should do.

Last but not least, I blatantly eyeballed the spacing of the three pins on the back of the shelf itself. In mine they were a bit too narrow, so I spaced them out by a couple of millimeters before uploading the model. They are there just as an extra safety to prevent horizontal sliding, since there was still space for them in the holes above the brackets anyway, but on mine I ended up just cutting the outer two and keeping the middle one instead of reprinting the whole thing. Please feel free to let me know if they are still too tight or if I overcorrected them (and if that's the case, please accept my apologies)