sunlu FilaDryer S1 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FAN for Filament Dryer S1 It is FAN holder for better heat distribution on drybox. There are two wariants. One version…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 773
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
FAN for Filament Dryer S1
It is FAN holder for better heat distribution on drybox.
There are two wariants. One version with step-down cirquit and second without. It allow to use 12V 4010 fan on 24V power supply. I am using 12V SUNON MagLev ME40101V1-000U-A99 fan powered on 9V to reduce noise and LM2596 DC-DC Step Down Buck Converter Module
For FAN holder you need 2pcs M3x6 screw, plus M3x5x5 brass insert (I recomend this high quality ones). It is possible to use 4 screws, but I recomend use only two (on top or on back)
StepDown screws are M2x4 + M2x3.2x3.0 brass insert
Holder for Mini LCD Digital Thermometer Hygrometer need M2x6 screw + M2x4.0x5.0 brass insert
OpenSCAD sources are included.
Inspired by https://www.thingiverse.com/thing:4628798
Links are affiliate links. Please use it, it is sufficient reward for me.
Print Settings
Printer:
HEVO MGN v3
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
20%
Filament: - ABS any
Category: 3D Printer Accessories