1 / 3
Anti-Vibration Feet for Sunlu S4 FilaDryer Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti Vibration Feet for the Sunlu S4 FilaDryer to minimize noise and vibrations.
- Ocena
- 4,833 / 5
- Polubienia
- 47
- Pobrania
- 260
- Wydruki
- 6
- Wyświetlenia
- 958
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 6) (Komentarze: 8)Remiksy (0)Kolekcje (105)Powiązane
Anti Vibration Feet for the Sunlu S4 FilaDryer to minimize noise and vibrations. Best printed with TPU. It also works with PLA and PETG if you stick an absorber pad on the foot.
The surface of the foot is better suited for a shock absorber than the narrow round stand of the Sunlu S4.
Snaps on the foot with any printed material and stands securely. The foot can then rotate slightly on the stand to level out any existing bumps.