1 / 2
Sunlu Filadryer S1 M6 & M10 PTFE fitting with screws, no drilling
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I flipped the connector 180 so I could bottom feed and point the tube upwards. Added an M10 version (untested)
- Ocena
- 4,667 / 5
- Polubienia
- 30
- Pobrania
- 246
- Wydruki
- 2
- Wyświetlenia
- 1042
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 12)Remiksy (0)Kolekcje (33)Powiązane
I flipped the connector 180 so I could bottom feed and point the tube upwards. Added an M10 version (untested)
