1 / 4
Sunlu Filadryer S1 M6 PTFE fitting with screws, no drilling — zdjęcie 1
1 / 4

Sunlu Filadryer S1 M6 PTFE fitting with screws, no drilling

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds a M6 PTFE fitting to your Filadryer which is very rigid and you just attach it to the existing screws.

Ocena
4,875 / 5
Polubienia
65
Pobrania
459
Wydruki
6
Wyświetlenia
2580
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Filadryer S1 PTFE fitting with screws

I created this because the other PTFE fitting mounts without drilling holes were very flimsy and broke easily. This allows you to add a M6 PTFE fitting to your box which is very rigid and you just attach it to the existing screws. The lid of the box can be opened and closed without issues and it's still sealed.

Please print it in ABS or anything else which withstands 60°C or more, PETG may be not sufficient.

You have to print it with supports on the build plate and make sure that there are no supports within the thread as you will never get them out.

No .step this time as it is a mess. The existing mesh I based this on is very highpoly and has some defects.

Tagi