Sunlu Filadryer S1 M6 PTFE fitting with screws, no drilling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a M6 PTFE fitting to your Filadryer which is very rigid and you just attach it to the existing screws.
- Rating
- 4.875 / 5
- Likes
- 65
- Downloads
- 458
- Makes
- 6
- Views
- 2,575
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filadryer S1 PTFE fitting with screws
I created this because the other PTFE fitting mounts without drilling holes were very flimsy and broke easily. This allows you to add a M6 PTFE fitting to your box which is very rigid and you just attach it to the existing screws. The lid of the box can be opened and closed without issues and it's still sealed.
Please print it in ABS or anything else which withstands 60°C or more, PETG may be not sufficient.
You have to print it with supports on the build plate and make sure that there are no supports within the thread as you will never get them out.
No .step this time as it is a mess. The existing mesh I based this on is very highpoly and has some defects.