Honda Odyssey headrest bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I noticed that the bushing for the headrest on one of my rear seats was missing, so i designed this. It prints as two…
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I noticed that the bushing for the headrest on one of my rear seats was missing, so i designed this. It prints as two pieces and then is glued together. The top piece has a cavity to help center the 'D' shaped piece for glue up. Some trimming may be needed if your printer has a tendency to over-extrude on the first layer.
Fits early 3rd Generation Odysseys (2005-2007). In 2008 they got Active Head Restraints, so I'm not sure how much changed. If you happen to need one for a 2008+ Odyssey, leave a comment to let us know if it works for you.
I'd suggest printing in ABS or PETG due to the potential for high temps inside a vehicle.
EDIT: I checked to see how the PETG was holding up after a week of 90*F temps. It looks to be doing fine, but I did notice that the cushion of the seat caused the bushing to work it's way up and out of the pipe. I have modified the bushing insert to be twice as long. I'd recommend using v2 of the stl file.
Print Settings
Printer Brand:
Printrbot
Printer:
Rafts:
No
Supports:
Yes
Resolution:
.3mm
Infill:
15%
Notes:
3 shells
PETG
Category: Automotive