1 / 6
Milk Frother Stand for Bodum Schiuma — zdjęcie 1
1 / 6

Milk Frother Stand for Bodum Schiuma

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Boodum Schiuma doesn't come with a stand, so I decided to make one that can be wall mounted.

Ocena
5 / 5
Polubienia
19
Pobrania
283
Wydruki
5
Wyświetlenia
1512
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Milk frother stand for the Bodum Schiuma milk forther. It was designed to allow easy and quick access to the milk frother while at the same time providing a sturdy and safe home for it while not in use.

The print uses gradual overhangs so there is no need for supports. I uploaded two versions: one with a .2mm base to ensure the print wont detach while printing (which is easily remove after printing), and a second with no additional base for those who like to live life dangerously (or have a delta style printer).

There are holes on the back of the print to fit 8mm wide by 4.75mm deep magnets. This allows the holder to stick to the side of the refrigerator. I recommend epoxy to glue the magnets into the print. Command strips (adhesive strips) can also be used to mount to any wall.

 

Recommended Settings:

  • Layer Height: 0.2mm
  • no supports needed

 

Tagi