1 / 6
Milk Frother Stand for Bodum Schiuma — image 1
1 / 6

Milk Frother Stand for Bodum Schiuma

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Boodum Schiuma doesn't come with a stand, so I decided to make one that can be wall mounted.

Rating
5 / 5
Likes
19
Downloads
283
Makes
5
Views
1,512
Reviews
5

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Milk frother stand for the Bodum Schiuma milk forther. It was designed to allow easy and quick access to the milk frother while at the same time providing a sturdy and safe home for it while not in use.

The print uses gradual overhangs so there is no need for supports. I uploaded two versions: one with a .2mm base to ensure the print wont detach while printing (which is easily remove after printing), and a second with no additional base for those who like to live life dangerously (or have a delta style printer).

There are holes on the back of the print to fit 8mm wide by 4.75mm deep magnets. This allows the holder to stick to the side of the refrigerator. I recommend epoxy to glue the magnets into the print. Command strips (adhesive strips) can also be used to mount to any wall.

 

Recommended Settings:

  • Layer Height: 0.2mm
  • no supports needed

 

Tags