Counting matching models…
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Ein kompakter, selbst entworfener Kaffee-Milch-Halter. Der kleine Milchbehälter oder Kaffeekapseln griffbereit organisiert. Das Design ist stabil und funktional gestaltet, sodass es ohne Stützstrukturen (Supports) gedruckt werden kann,…
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…
Yet another bird feeder. Thread fits 37mm milk bottle. Standard water bottles gets clogged by sunflower seeds. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: No **Resolution:** .2 Infill: 30 **Filament:** fiber3d…
layer height: 0,2 infil: 30% support: yes I print from petg fiberlogy vertigo
Milchschlauchhalter für die Jura Giga 5 + 6, passt auf die LED der Tassenbeleuchtung.
My first ever first hand made model, to replace a broken flap for the milk jug. Couldn't find one pre-made anywhere. Created in Fusion. I printed in PLA on a Bambu P1S with standard PLA settings, nothing tweaked. Hope this is of use to…
Shadow Milk Cookie "Sage of Truth" Puppet Holding Animation. HUGE credit to flxff..c3t for making the image, all I did was turn it into a stl file. Also, I have no idea what the username is for.
Holder designed to help anyone with a weak grip to carry and pour from a half gallon milk or juice container. Printed with PLA on a Prusa MK3.9S using organic supports on build plate only
Disclaimer: I am not associated with any of the following legal entities: LEGO®, Minecraft®. There is no intention to infringe on any of their intellectual property.
Fridge organizer for Kinder Milk-Slice or Monte snacks. Holds five of them. Print two organizers to fit whole box. It has separator inside so the snacks don't fall when there are not too many. Print settings: 0,2 layer height "print…
I made this simple fridge magnet based on a US 1 gallon milk jug. I included my file which has pockets designed in for 6x3mm magnets but also a solid model so that you can use modifiers in the slicer to add your own magnets as desired. If…
fill the 3d printed part with food grade silicone to make the mold put 62% cacao paste and 38% coconut milk powder in a wet grinder for a few hours temper the chocolate and pour it in the mold
fill the 3d printed part with food grade silicone to make the mold put 2/3 cacao paste and 1/3 coconut milk powder in a wet grinder for a few hours temper the chocolate and pour it in the mold
fill the 3d printed part with food grade silicone to make the mold put 50% milk powder, 33% cocoa paste and 17% cocoa butter for a few hours in a wet grinder (or mix ½ “Amara” ½ “Shiro” bars) temper the chocolate and pour it in the mold
fill the 3d printed part with food grade silicone to make the mold pour ½ “Fragile” and ½ “Shiro” in the mold Fragile: https://www.printables.com/model/1604939-fragile-milk-chocolate-bar Shiro:…
bit of a filament hog. Okay so some notes, it was a little tight in the milk crate but I kind of like it because I don't want it to come out. It is worth noting that the small holder size is maybe a half a millimeter too small they fit…
This is a cap to fit the milk spout on the Miele CVA6xxx built-in coffee machine milk container lids. The cap has little ribs for a more tolerant grippy fit, and I made it a little chunky so it's easier to handle. Sizing: You don't want…
No supports needed. "Brick" on the handle is to mark "fuzzy skin" area on handle for better grip. You can just delete it, if you want a smooth handle. Includes 3 variations of holder clips: "soft", theeth and mount for paper clip. If you…
Gridfinity 1x1 Container that uses UK milk lids 2 sizes approx 70mm and 55mm
Clean up your setup with this perfectly-fitted Clip-On Jug Pouring Handle, Attaches To Milk Cartons, Easy Grip Pour Assist Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Clean up your setup with this perfectly-fitted Clip-On Jug Pouring Handle, Attaches To Milk Cartons, Easy Grip Pour Assist Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A basic replacement for a broken milk frother. All files attached that are needed, also for your customization.
Solid bottom milk crate cutlery holder. 4 separate areas
We have a second dog living with us now and that dog had no problem with going into the pantry and taking a large MilkBone dog treat from the box on the floor. I designed this cover to stop the thievery and, so far, it's worked! My…
Turn empty milk jugs into quick, handy containers in minutes. This fixed-height milk jug cutter uses a standard box cutter blade to make clean, consistent cuts so you can upcycle plastic jugs into temporary pots, scoops, trays, seed…
I was truly shocked to see this didn't already exist so I had to make it myself. The koozie itself fits a standard 12 oz can. There are two inserts that slide in to fit skinny cans (e.g. White Claw) and Coors Light cans - because of…
For some reason no one has made a tray to hold an stabilize the Motif brand silicone breast milk bags we have multiple trays for the free plastic ones they give. Out of need I made these models myself measuring the bag dimensions and…
Hitting the milk jug on the table (or tapping or banging the jug) is done to break up large bubbles and stabilise the foam after steaming. This step, often followed by swirling, ensures a consistent, silky microfoam for latte art by…
DeLonghi LatteCrema Milk Carafe Wall Mount / Holder I designed this custom wall mount for the DeLonghi LatteCrema (Hot/Cool) milk system. If you’re like me and want to keep your countertops clean while the milk carafe is not in use, this…
The spoon holds about 15g of powder. It is available in two variants: With hole → ideal for hanging or attaching to hooks Without hole → clean, uninterrupted handle design This 3D printable spoon is a complete redesign from scratch(!)…
This model is a remix of my redesigned spoon, now featuring a shorter handle for improved control and compact usability. Originally based on the model: This version keeps the clean and minimal design of the full redesign but adapts the…
Tetrapak milk carton. Prevents deformation of the carton and accidental spillage of milk.
The Momcozy milk warmer bottle opener, but only one piece so without the hard lock swiping it down.
Flattens breast milk storage bags using magnets so they store neater when frozen. You'll need to print whichever size you need twice. Uses 8 5x3mm neodymium magnets for each side (16 total). I used these settings: Material: PETG (more…
I designed this stand for the Bonsenkitchen milk frother as a gift for a friend. The stand might also fit similar devices. For reference, the Bonsenkitchen milk frother's housing has an oval profile measuring 35 x 27.5 mm, tapering over…
Made with PLA. Used Orca FlashForge and set all the speed settings to half. Everything else was default
A sweet lightbox featuring the iconic Milka logo, ideal for chocolate lovers. Brings a cozy and playful vibe to any space. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!…
This is a replacement part for the attachment of the stainless steel wisk head for the Arendo Milk Frother 'Mini Milk Star'. The original attachment is of weak design and after 1-2 years of every-day use, it breaks. I replaced it already…
Ini merupakan model 3D dari Scoop untuk susu kedelai dengan berat kurang lebih 50g, dengan rincian sebagai berikut: -Tabung:tinggi dinding luar 71mm, alas 3mm -tangkai:panjang 35mm lebar 15mm Karya ini merupakan hasil saya, untuk yang…
Just upgraded to a De'Longhi Rivelia, and wanted to be able to have a dedicated place to store it. Didn't fit on our fridge door, mostly due to mustard/mayo/hot sauce inventory levels. These clamps slide on to my size fridge shelf, and we…
a simple cap to act as a variable humidity dome for seedlings and small plants. the baffle has a slight raised perimeter on one side, this should be printed up so you don't need supports, and installed down to allow the screw to tension…
A miniature milk can commonly found on farms. More models here → https://cults3d.com/ja/yuza/ichigodaifuku/3d-moderu This model represents a large steel container traditionally used for storing and transporting milk. Its simple and sturdy…
Universal Milk Foam Frother Wall Mount Or Stand. This is a remix to enhance compatibility and usability. Simply add double sided tape and mount anywhere. Print normal with bottom on the plate. No support required.
Printing: lay on the backside no special settings required See also the FreeCAD project file on GitHub: milk-frother-wall-mount.FCStd
Take a look to my new and complete redesigned spoons here: EN: A spoon that holds about 15g of powder. The spoon is an improved version of my “old”, smaller spoon. If you like my model(s) please leave me a like to support my work. Thank…
This radius gauge generator offers the following features: Adjustable step Adjustable range from 1 to 25 mm Constant square angle for each radius gauge Adjustable layer height Adjustable printer tolerance Supports different types of…
Simple storage solution for Motif Medical (or similar-sized) breast milk storage bags. I have printed multiple of these in PETG with .6mm nozzle at .28 layer height. It includes bridge support for the opening at the bottom, they should…
Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8
Tested with a Cherrybomb 35 back bike light, but likely would work with any other bike light that has a clip to attach to clothing. From what I've found here on Printables, many tend to have a clip a few millimeters deep and 20…
Milk Pipe Holder for Jura Coffee Machines To keep organized and protect your milk pipe from dust and other contaminants when not in use. Fits all Jura coffee makers with clear milk pipe. TPE filament used, should work with any other…
Love your hot chocolate, mochas and chai lattes? Well you probably have either the Dualit Milk Frother or the Hotel Chocolat Velvetiser to make sure your beverage arrives in premium frothed condition! If you do like the drinks but dont…
This is a really simple print that uses some mid print M3 Nuts and two 10mm M3 bolts to firmly secure “The Milky Way” Lego set to the wall. Most of the weight is held by the main body of the print where it juts out, distributing the…
Ich habe sie mit Overture ASA braun https://www.amazon.de/gp/product/B0BNC8376B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 ASA gemacht . Sieht aus wie echt. Layer 0,08 first Layer 0,2 Die Bruchkante habe ich mit Fuzzy Skin gemacht
Ich habe sie mit Overture ASA braun https://www.amazon.de/gp/product/B0BNC8376B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 ASA gemacht . Sieht aus wie echt. Layer 0,08 first Layer 0,2
Carrier for four glass milk bottles with approximately 260 mm height and 90 mm diameter.
Leider ist der Originaldeckel meiner Kaffeemaschine schon so deformiert, dass er nicht mehr richtig schließt. Der Ersatz ist bis 70°C getestet, spülmaschinenfest. Material TPU95 Layerhöhe 0,2 mm Infill 25 % Support 0% TPU A95 von 3DJake…
Ich fand die Serie nicht schlecht, dass einzige was mir gefallen hat war der Sticker auf dem Auto.
a replacement screw lid for a commercial milk tank that is used for garden water transportation the original one got lost so I had to make a replacement one because of the special thread used: G1 ½ inch euqal to DIN Pipe Thread…
I created it for my Severin Spuma 700 Plus, but it should also fit for Spuma 500 and 700 (without Plus). If the milk frother is standing in the kitchen all the time and no milk pot is inside, it gets covered by dust and frying fat. This…
This is a replacement lid to the milk container on the Seimens EQ500 coffee machine. No hardware needed, use a pice of filament for the hinge pin.
Small bottle for a flavored Taiwanese milk tea. The actual white cap is covered by colored plastic top - this can be removed by hand. Print in vase mode, with PLA, 0.5 line width.
I designed this to help normalize and destigmatize breastfeeding, as well as make my wife laugh. There are other similar dispensers available online to download, but all the ones I tried had issues (either too thin to print correctly, or…
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Ein kompakter, selbst entworfener Kaffee-Milch-Halter. Der kleine Milchbehälter oder Kaffeekapseln griffbereit organisiert. Das Design ist stabil und funktional gestaltet, sodass es ohne Stützstrukturen (Supports) gedruckt werden kann,…
Gridfinity “Latte Box” (Milk Crane) - Desk Organizer - Stackable - Custom Inserts Yes, another gridfinity system. But this time it's cute, nice to print , and a perfect desktop decor . 5 new “latte boxes” to better organize your desk.…
This milk holder is designed for the dimensions of a Czech milk box. Thanks to the gaps at the bottom and back, the milk does not fall out of the holder while you are pouring the milk. Dimensions: Czech milk box 65x95×165mm Holder inside…
This is a bi-color keychain, for those with AMS, you'll know how to configure, i dont. For us, mortals, set a “Pause at height” just when the letters start to appear, i printed it with 0.2 layer height so it was at layer 14.
basically I created this just for my wife, but since people were asking about it, here we go :)
Wall mount for a milk frother / blender of make Rosenstein & Söhne. This model is an updated and improved version with a stronger back plate. The previous model was too thin and even 3M tape got loose.
3%Milk is a mod of 2%Milk with reset button, place for a battery and a closed back. The reset button is 6x6x5mm My battery is 7x17x42mm the available space is 7x23x43. The original is licensed under The CERN Open Hardware Licence v1.2 and…
This is universal milk box holder , that should fit most of milk boxes or other boxes that have paper notch on the end . It holds full 1 liter box without a problem even when printed on bad settings (as I did for this test :) ). Tested on…
Rukojeť na krabicové nápoje pro snadné nalévání, inspirován podobným produktem který se již nevyrábí. Rukojeť pasuje na malé i velké krabice hlavně mléka. Nasazuje se odlepením rohu který se protáhne a ohne pod pojistnou rukojeť.
4x AA battery container that uses common milk bottle caps. The thread is a 3-start, 3mm pitch. Update 27/04: Uploaded v2 with thicker threads. Milk bottle caps worked, but juice caps could not get a purchase on the thread. V2 works with…
*FIXED: Lettering on “MILK” needed to be inverse in order to print correctly. Fixed .stl file now attached. 2 cookie cutters: 1 Milk Bottle 1 Cookie with a bite taken out of it
Cleaning the milk frother adapter is not so easy, so I wanted to have replacements. Use a material which can resist the heat of the water vapor! Especially for the inner part! My first prints were using PLA which is not suitable! Print…
Needed to make a holder for 2 frothers, where each was a different size and shape. So I decided to make one that would fit them both. Fits max 34mm in diameter frother and max 3mm shaft diameter. I printed it with ASA, but any filament…
A custom-designed holder for the Subminimal Milk Frother, ensuring secure and stylish storage. This holder is compact, easy to 3D print, and perfect for organizing your coffee making tools.
A few days ago I opened a new milk carton and though that was kind of hard. So I brain stormed different ideas and this is what I came up with. I tested it and it works great.(this also might help kids with opening the milk too) print…
Remix of the system made to enforce FIFO on breast milk bags and prevent clutter in the freezer. It was designed for a 6oz Lansinoh bag of milks. Fixes bottom plate not connected properly in original design.
The milk frother head of the Saeco coffee machine kept coming off and wouldn't stay in place, so I had to hold it while frothing. This solved the problem. Made a V2 version with better fit and design - if you want download the _v2 STL file.
Baby milk powder container with an added partition for proper measuring cup alignment. Used with a reserve for 350 g of milk. Print with support under partition for proper measuring cup alignment. Print with 11 cm wide top -…
Very simplistic representation of a milk carton. Usable as a vase, or decorative object. Recommend to weigh down with a bit of sand on the bottom if you do use it to put something in. Print at 0.4 nozzle at 0.2 layer height. Untested at…
This is a custom-designed holder for the Philips 3200 Series coffee machine. The holder is designed to take advantage of the structural features of the machine. It slots into the side vent holes using two pins for positioning and is…
this is awesome you must print. might have supports idk, but it's all 3d printed and all one piece comment if it works and if it doesn't come out good tell me and ill see what I can do. slight gap between phone and right hand but printer…
Needed a holder for the milk frother that fits exactly. If you download the STL, you need to add the negative element to get the openening to slide in the frother from the side, since i was unable to export it as an STL with the opening
The Milk container key coming with the device seems to be something usable in a restaurant, etc. - but for home you want to have something which can stay in there, looks nice and is easy to operate. This is the second version of the key,…
Since my new aroma lamp needs constant refills of water, I needed something fitting in shape and designed this small and simple milk/water jug. There's also a version with handle, but I didn't test it, yet. The optional lid consists of…
My Lid for Nespresso milk frother was broken so I designed 3D printing settings Printer brand: Prusa Printer: MK4 Resolution: 0.2 Infill: 25% Filament brand: Any Filament color: Any Filament material: PLA Supports: Organic on build plate…
In the UK, plastic milk bottles used to come with brightly coloured tops to identify the type of milk: blue for full cream (whole) milk, green for semi-skimmed, and red for skimmed milk. Some years ago, to enable recycling, these tops…
A simple spool holder I created to add some colour to 3D pen workshops I was giving to kids (of all ages) during FabCity Rotterdam. It sits and fits on the edge of a typical Dutch milk crate. Might fit on other crates as well. Otherwise,…
![[Fixed] Breast Milk Storage Container - Lansinoh Bags](https://media.printables.com/media/prints/1099563/images/8310435_705d8a96-d332-4428-a99d-b5ccb68470b4_86b748f0-c671-4aa7-b11b-58aa61fe22a7/screenshot-2024-12-06-113407.png)
