Philips / Saeco LatteGo milk container tip-over protection holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.94 – €6.04 net (excluding VAT)
For file: milk_container_tip_over_protection_holder_0.3mm_PLA_MK3S_4h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.49 excluding VAT (range midpoint).
- Weight reported by the author
- 93 g
- Print time reported by the author
- 4.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Philips / Saeco LatteGo milk container tip-over protection holder. May work for other similar machines too...
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 195
- Makes
- 1
- Views
- 2,363
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Philips / Saeco LatteGo milk container tip-over protection holder.
I am using a Philips Series 5400 fully automatic coffee machine since a few weeks and i like it a lot.
Especially cleaning the parts is 10x faster and easier done than on my previous used DeLonghi machine…
The best part they thought of is the milk container, you will see in the pictures in the link. It is so fast cleaned and does not require to clean some extra hoses in cleaning liquid or some other time consuming actions, which made me stop using the milk containing options on my old coffee machine…
The designers thought of mostly everything to make the milk container super good usable when it is mounted to the machine - but only then in my opinion… When you request 1 cup of milk coffee or other milk containing creations only, then you will have milk left in the container and need to put it in your refrigerator…
This is creating then a possible problem in my opinion. The milk container can tip-over because of its shape in the refrigerator and will create a mess, which you do not want to happen… If the milk container would have a wider foot, this would be prevented…
The here shown possible solution to this problem lets you easily slide in the milk container in the 3D part and adds the imho missing wider food to prevent it to tip-over. =)
I will add some rubber feet with a 10mm diameter to have the holder securely and raised standing in my refrigerator.
The holder has a bigger hole in the middle in case you want to clean it from time to time.
Notes:
- If you have a look to other Philips, Saeco or other coffee machines with such “LatteGo” milk containers, they all look similar to me. So it is possible, that this holder might work for these too…
Printing instructions:
- 0.3 draft profile
- No brim
- Supports set active from the print bed for the rubber feet holes - may not be needed…
Happy printing =)