E3D Revo Nozzle Holder for Prusa i3 MK3 MK3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,16 € – 1,42 € netto (bez VAT)
Dla pliku: PRUSA i3 E3D Revo Nozzle Holder_0.2mm_PLA_MK3S_1h30m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,29 € netto (środek widełek).
- Masa podana przez autora
- 12 g
- Czas druku podany przez autora
- 1,49 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A simple Revo Nozzle holder that stores the Nozzles in reaching distance
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a small Nozzle holder that rests on top of the PSU and hooks around the frame.
It was inspired by visles “MK3S+ Hook for scraper tool” and is also compatible with the scraper tool hook. They just stack on each other as you can see in the pictures.
Reason I designed this holder was that the “original” E3D Nozzle Clip sometimes caused some collision with filament spools on the original MK3S+ Spool holder.
The part in the pictures was printed with 0.2mm layer height without supports.
It is mounted on a MK3S+ but should be compatible with most prusa i3 printers with the same frame. (please give feeback if thats not true so I can change the description)
Hope you like the design. Always open to constructive input or changes.
Check out my other Models!!
Happy printing!