1 / 2
Phone Mount Ball Joint to goPro adhesive mounts - 17mm Ball joint — zdjęcie 1
1 / 2

Phone Mount Ball Joint to goPro adhesive mounts - 17mm Ball joint

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to mount my phone mount to the dash using goPro adhesive mounts.

Ocena
5 / 5
Polubienia
49
Pobrania
282
Wydruki
1
Wyświetlenia
1817
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Short, new Version: https://www.printables.com/model/470834-phone-dashboard-mount-v2

17mm seems to be the default for many chargers using ball joints.

I recommend printing in a Material with a higher melting temperature to prevent deformation during warmer days. 

Depending on your climate you might want to support the mount by resting it on you dash as the adhesive eventually came loose with the additional leverage from slamming my phone into the mount on a hot day.

 

I used it for these phone mounts / chargers:

The adhesive mounts.

(Please excuse the German links ;) )

For assembly you need:

  • M3x22 or longer
  • M6x20 or longer
  • M4 Nut

Tagi