Ryobi One+ HP Brushless Line Trimmer Shoulder Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To let you connect the shoulder strap that comes with the jet blower attachment to your One+ Line Trimmer.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
When I bought the Ryobi One+ brushless line trimmer and expand-it blower I had a shoulder strap that I couldn't use, probably because the One+ line trimmer didn't come with a suitable place to clip on the strap.
3D Printing fixed that! This simple bracket was created using OnShape.
I printed this with PETG (because that's what I had loaded at the time) and 40% infill. No supports are required.
You have to remove the ratcheting clamp in order to slide this bracket over the shaft. Said ratcheting clamp uses a reverse threaded nut + torx bolt to retain the knob, and once undone it should come off with a little bit of prying and pulling. Use M4 bolts and preferably nylock nuts to clamp the bracket onto the shaft.