Ryobi One+ HP Brushless Line Trimmer Shoulder Strap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To let you connect the shoulder strap that comes with the jet blower attachment to your One+ Line Trimmer.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 56
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
When I bought the Ryobi One+ brushless line trimmer and expand-it blower I had a shoulder strap that I couldn't use, probably because the One+ line trimmer didn't come with a suitable place to clip on the strap.
3D Printing fixed that! This simple bracket was created using OnShape.
I printed this with PETG (because that's what I had loaded at the time) and 40% infill. No supports are required.
You have to remove the ratcheting clamp in order to slide this bracket over the shaft. Said ratcheting clamp uses a reverse threaded nut + torx bolt to retain the knob, and once undone it should come off with a little bit of prying and pulling. Use M4 bolts and preferably nylock nuts to clamp the bracket onto the shaft.