Amazon Firestick Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your Firestick remote in a dedicated place right next to you
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1059
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your Firestick remote in a dedicated place right next to you with this holder.
It was made to fit the Amazon Firestick, and slide in place on the side border of a bed.
In our case, it was a 50 mm wide, 23 mm thick border, but we are including the parametric Fusion 360 files if you want to modify it. You just need to change the “border_width” and “border_thickness” parameters and it will adjust itself :)
3D printing tips
To make ours, we printed it using a 0.4 mm nozzle, at 0.2 mm layer height.
It should be printed standing up, with the angled end up. You can use a small Brim to improve adhesion, but it should not be necessary.
Filament we used
This model was printed on Polymaker's Polyterra PLA Arctic Teal and Cotton White. We truly love these colors and the filament is great, giving you a nice matte surface finish. If you buy the filaments using these links you are also supporting us (we may receive affiliate commissions, with no additional costs for you!)
Follow us / support
Did you like this design? Follow us on Instagram! We are @twothingies
If you really like what we are doing and want to support us, you could buy us a coffee or two!
Selling prints of our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!
If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]