1 / 4
Hot Wheels Nissan Leaf Nismo RC_02 Display Base — zdjęcie 1
1 / 4

Hot Wheels Nissan Leaf Nismo RC_02 Display Base

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This display base is a modified GigaPenguin-s Tomica Nissan Fairlady Z 2023 Display Base. This base is fit for HW cars.

Ocena
5 / 5
Polubienia
37
Pobrania
64
Wydruki
1
Wyświetlenia
1140
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

This display base is a modified GigaPenguin-s Tomica Nissan Fairlady Z 2023 Display Base. This base is fit for HW cars.

The display base is separated into 3 parts for easy printing and colour swap. The parts are:

1) Name plate

  • Nameplate_Nissan_Leaf_Nismo_RC_02.STL

2) Base

  • BaseV3.STL (print upside down on a textured baseplate, no support needed)

3) Base back wall:

  • boxbackassem_leaf_nismo_rc_02_V1.STL → New Nissan symbol
  • boxbackassem_leaf_nismo_rc_02_V2.STL → Old Nissan symbol

Print Settings

Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "Nameplate_Nissan_Leaf_Nismo_RC_02":
1) Start (Background colour, mine is in black)
2) Layer 9 ("Nissan Leaf Nismo RC_02." lettering colour, mine was white)

Filament change layer for colours on "boxbackassem_leaf_nismo_rc_02_V1":
1) Start (Nissan symbol background, mine is in red)
2) Layer 11 (Nissan symbol and Nissan Intelligent mobility background, mine is in white)
3) Layer 14 ("Nissan" and "Nissan Intelligent mobility" text color, mine is in black)
4) Layer 17 (Part of "Nissan Intelligent mobility" symbol, mine is in blue)

Filament change layer for colours on "boxbackassem_leaf_nismo_rc_02_V2":
1) Start (Nissan symbol background, mine is in red)
2) Layer 11 (Nissan symbol and Nissan Intelligent mobility background, mine is in white)
3) Layer 14 ("Nissan" and "Nissan Intelligent mobility" text color, mine is in black)
4) Layer 17 (Part of "Nissan Intelligent mobility" symbol, mine is in blue)
5) Layer 20 (Nissan symbol, mine is in grey)

Assembly

The car is tied by wires through the hole in the base

Back plate and name plate should slide in nicely into the display base. The name plate will need some double sided tape to hold it nicely.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

Follow GigaPenguin here:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Tagi