Hot Wheels Nissan Leaf Nismo RC_02 Display Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This display base is a modified GigaPenguin-s Tomica Nissan Fairlady Z 2023 Display Base. This base is fit for HW cars.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 64
- Makes
- 1
- Views
- 1,140
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This display base is a modified GigaPenguin-s Tomica Nissan Fairlady Z 2023 Display Base. This base is fit for HW cars.
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate
- Nameplate_Nissan_Leaf_Nismo_RC_02.STL
2) Base
- BaseV3.STL (print upside down on a textured baseplate, no support needed)
3) Base back wall:
- boxbackassem_leaf_nismo_rc_02_V1.STL → New Nissan symbol
- boxbackassem_leaf_nismo_rc_02_V2.STL → Old Nissan symbol
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "Nameplate_Nissan_Leaf_Nismo_RC_02":
1) Start (Background colour, mine is in black)
2) Layer 9 ("Nissan Leaf Nismo RC_02." lettering colour, mine was white)
Filament change layer for colours on "boxbackassem_leaf_nismo_rc_02_V1":
1) Start (Nissan symbol background, mine is in red)
2) Layer 11 (Nissan symbol and Nissan Intelligent mobility background, mine is in white)
3) Layer 14 ("Nissan" and "Nissan Intelligent mobility" text color, mine is in black)
4) Layer 17 (Part of "Nissan Intelligent mobility" symbol, mine is in blue)
Filament change layer for colours on "boxbackassem_leaf_nismo_rc_02_V2":
1) Start (Nissan symbol background, mine is in red)
2) Layer 11 (Nissan symbol and Nissan Intelligent mobility background, mine is in white)
3) Layer 14 ("Nissan" and "Nissan Intelligent mobility" text color, mine is in black)
4) Layer 17 (Part of "Nissan Intelligent mobility" symbol, mine is in blue)
5) Layer 20 (Nissan symbol, mine is in grey)
Assembly
The car is tied by wires through the hole in the base
Back plate and name plate should slide in nicely into the display base. The name plate will need some double sided tape to hold it nicely.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
Follow GigaPenguin here:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/