Gutter Solar Panel Light Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips onto my guttering (UK). To hold my solar panel holder onto Guttering
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple clip on a block that clips firmly onto my guttering. There is a 4 mm, approximate, extruding lip on the guttering.
The item is 30 x 40 mm and 25 mm deep. The clip is 6 mm wide this teeth are offset and 1.75 mm before 0.5 fillet. The Block has a 3.8 mm hole which will allow me to attach my solar panel holder to it.
I am finding Onshape easier to work with after playing around with SCAD, FreeCad, and Fusion 360 and I have attached a link to original file that can be copied into a free Onshape program to mess with as you see fit.
Ok after attaching the first one I felt that I could knock off at least 5 mm off the depth (screw hole is 20 mm deep), and after trying a 4 x 10 mm screw decided to reduce screw hole to 3.6 mm (4 x 20 mm were ok in first print) but smaller length screws were loose
There are two STL files one is 30 mm 3.8 mm the new smaller one 25 mm 3.6 mm.
I have now attached a photo of the profile of the guttering
The clips are attached to https://www.printables.com/model/200938-outdoor-solar-lights-panel-holder which i made for fence and walls.
20/06/24: After a year of use the ones in a very open position, Taking the full force of wind and sun item needs petG