Gutter Solar Panel Light Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips onto my guttering (UK). To hold my solar panel holder onto Guttering
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 815
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Simple clip on a block that clips firmly onto my guttering. There is a 4 mm, approximate, extruding lip on the guttering.
The item is 30 x 40 mm and 25 mm deep. The clip is 6 mm wide this teeth are offset and 1.75 mm before 0.5 fillet. The Block has a 3.8 mm hole which will allow me to attach my solar panel holder to it.
I am finding Onshape easier to work with after playing around with SCAD, FreeCad, and Fusion 360 and I have attached a link to original file that can be copied into a free Onshape program to mess with as you see fit.
Ok after attaching the first one I felt that I could knock off at least 5 mm off the depth (screw hole is 20 mm deep), and after trying a 4 x 10 mm screw decided to reduce screw hole to 3.6 mm (4 x 20 mm were ok in first print) but smaller length screws were loose
There are two STL files one is 30 mm 3.8 mm the new smaller one 25 mm 3.6 mm.
I have now attached a photo of the profile of the guttering
The clips are attached to https://www.printables.com/model/200938-outdoor-solar-lights-panel-holder which i made for fence and walls.
20/06/24: After a year of use the ones in a very open position, Taking the full force of wind and sun item needs petG