Apple TV 5th Gen Remote Holder for Under Table or Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder to put your Apple TV 5th Gen Remote on the side or bottom of a table or wall.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 303
- Wydruki
- 2
- Wyświetlenia
- 1121
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
Hi everyone!
This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I personally use it with velcro command strips¹ and they have no issue holding it up.
Print Settings
This is a pretty easy part to print and doesn't need infill to be strong, I used:
- Layer height: 0.15-0.2 Quality
- Infill: 5% Gyroid
- Supports: None
- I printed this in Prusament Galaxy Black PLA¹
Model Files
Note: I make all of my models in Creo, Printables does not support the file type so I put all of my models in this GitHub Repo.
1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!