Mr. BulletFeeder Controller Mount for Dillon RL1100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bulletfeeder controller mount to attach to the Dillon RL1100 casefeeder support pole.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 476
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I really liked madmac10's Mr. BulletFeeder controller mount for the XL750 (assume it would work fine with the XL650), and printed it for my XL750. I also have a RL1100, and the casefeeder support pole is square-ish, 25.99mm x 25.62mm, so I remixed this to fit the RL1100 casefeeder pole.
I've printed the original twice, and suggest adding a 18(x)-16(y)-18(z)mm box modifier, centered over the screw holes in each side, and set the infill for that to be 100% rectilinear. Make sure that the box modifier is completely within the original body halves, as I have seen strange things happen if it isn't.
.2mm layer height, 15% gyroid infill, PLA or PETG.
Assemble with a 10-24 x 1" socket cap screw (you can carefully use it to chase the threads that were present in the original model. It worked for the one I already printed, but I may add a hex-nut cutout on the half that isn't recessed for the socket cap.
I've included the .3mf file with the modifier box and infill, and a gcode print file. I'm currently playing with a .6 nozzle, so you'll have to mod your file and slice it for your printer.