Mr. BulletFeeder Controller Mount for Dillon RL1100
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bulletfeeder controller mount to attach to the Dillon RL1100 casefeeder support pole.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 2
- Views
- 476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I really liked madmac10's Mr. BulletFeeder controller mount for the XL750 (assume it would work fine with the XL650), and printed it for my XL750. I also have a RL1100, and the casefeeder support pole is square-ish, 25.99mm x 25.62mm, so I remixed this to fit the RL1100 casefeeder pole.
I've printed the original twice, and suggest adding a 18(x)-16(y)-18(z)mm box modifier, centered over the screw holes in each side, and set the infill for that to be 100% rectilinear. Make sure that the box modifier is completely within the original body halves, as I have seen strange things happen if it isn't.
.2mm layer height, 15% gyroid infill, PLA or PETG.
Assemble with a 10-24 x 1" socket cap screw (you can carefully use it to chase the threads that were present in the original model. It worked for the one I already printed, but I may add a hex-nut cutout on the half that isn't recessed for the socket cap.
I've included the .3mf file with the modifier box and infill, and a gcode print file. I'm currently playing with a .6 nozzle, so you'll have to mod your file and slice it for your printer.