Brad's 3D Printed Maslow Chain Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this after I noticed that the my chains were skipping because the slack end of the chain wasn’t lining up with…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 855
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made this after I noticed that the my chains were skipping because the slack end of the chain wasn’t lining up with the motor sprocket. Because the slack end of the chain connects to a bungee which goes around a pulley that is directly on the face of the top beam but the sprocket is about 1 cm in front of the top beam, this is sometimes enough to cause a chain skip.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.