Brad's 3D Printed Maslow Chain Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this after I noticed that the my chains were skipping because the slack end of the chain wasn’t lining up with…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 0
- Views
- 855
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I made this after I noticed that the my chains were skipping because the slack end of the chain wasn’t lining up with the motor sprocket. Because the slack end of the chain connects to a bungee which goes around a pulley that is directly on the face of the top beam but the sprocket is about 1 cm in front of the top beam, this is sometimes enough to cause a chain skip.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.