Ender 3 CR-10 anti collision fan mod set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan mod for Creality ender 3 - CR-10 printer. I print it in my ender 3. I try another fan mod similar to…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a fan mod for Creality ender 3 - CR-10 printer. I print it in my ender 3.
I try another fan mod similar to this, but it hit the bed clamps when printing large objects, so I decide to make my own with low profile as possible and take off the material not needed, as an adition another problem in this printers it´s the air escaping from the heatsink cooler to the bed so I design a cap to redirect the flow to the heatsink and it´s working very good!
I print the hotend fan duct in PLA and the cap in PetG as it will be very near to the hotend, the fan duct it´s working very well, but the cap it´s deforming as it touch the silicone block.. I will try to print it in another material more heat resistant.
With this mod you barely notes there is an upgrade in the machine!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: PetG - PLA black - metal gray
Notes:
I print the fan duct in PLA 0.12 resolution but it will work in 0.2
Category: 3D Printer Parts