X-Wing 2.0 Attack and Defense Dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attack and defense dice for X-Wing the Miniatures Game 2.0. As close to the originals as I could get.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Attack and defense dice for X-Wing the Miniatures Game 2.0. As close to the originals as I could get.
Please consider following me on Etsy.
https://www.etsy.com/shop/CustomXWingMinis
And Twitter:
https://twitter.com/XWingMinis
Print instructions
Print 100% infill for solid die.
If you want to use less than 100% infill avoid heavily anisotropic infills like honeycomb and make sure that top/bottom layer thickness is equal to the perimeter thickness. For my printer with a 0.4mm nozzle, that means 0.46mm line width with 3 shells/perimeters is 1.38mm walls. Meanwhile, the top/bottom layer height at 0.1mm is ~1.4/0.1 = 14 layers.
For maximum detail print as high a resolution as you can. I used 0.1 and it turned out just fine. You can go to 0.05mm if you desire.
Select a flat die face with no icon as the side touching the bed.
Painting the icons afterwards like the standard dice makes it look even better.