X-Wing 2.0 Attack and Defense Dice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attack and defense dice for X-Wing the Miniatures Game 2.0. As close to the originals as I could get.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 169
- Makes
- 1
- Views
- 817
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Attack and defense dice for X-Wing the Miniatures Game 2.0. As close to the originals as I could get.
Please consider following me on Etsy.
https://www.etsy.com/shop/CustomXWingMinis
And Twitter:
https://twitter.com/XWingMinis
Print instructions
Print 100% infill for solid die.
If you want to use less than 100% infill avoid heavily anisotropic infills like honeycomb and make sure that top/bottom layer thickness is equal to the perimeter thickness. For my printer with a 0.4mm nozzle, that means 0.46mm line width with 3 shells/perimeters is 1.38mm walls. Meanwhile, the top/bottom layer height at 0.1mm is ~1.4/0.1 = 14 layers.
For maximum detail print as high a resolution as you can. I used 0.1 and it turned out just fine. You can go to 0.05mm if you desire.
Select a flat die face with no icon as the side touching the bed.
Painting the icons afterwards like the standard dice makes it look even better.