Counting matching models…
I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
It is a double sided men's beard comb designed to fit nicely in the hand while being functionable. There is a course and fine side to the comb. V1: Printing Instructions for V1: Download model Slice model with supports turned on for the…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Overview This is a sturdy double-sided shower hook. Great for towels, wash cloths, etc. if you don't have a towel bar nearby. I designed this to fit my shower which has a width of just under 1". I designed the hook to be non-slip by…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
This is a remix of jman1865's Magic the Gathering counters: I just made the counters double-sided, with +1/+1 on one side and -1/-1 on the other. The box from jman1865's “MTG +1/+1 and/or -1/-1 counters with case” will fit 19 of these…
This is a scraper that uses replaceable dual sided plastic blades readily available on Amazon (search for: “Sticker Remover Plastic Blade 100 PCS”). The blades come in a pack of 100 for about $6-9. Which in the long run is a much better…
I used OnShape to create this model. For each face, the diameter of the pips are adjusted to ratio 1/(n^(⅓)) so that the volume lost for the pips is the same across all faces. You can find the model on OnShape and copy/modify it if you…
Double-sided background customizable in width and height. Provided with holes for connecting the two bases with threaded rod and for fixing on a wooden panel. The joint is based on a balance between friction and tolerances; although the…
A Pentagonal pyramid aka 5 Sided Pyramid
Yet another command strip / Tesa Powerstrip / two-sided tape mount for the openGrid system. I had the following design goals in mind: Easy to print Visually occupying only two slots Should be visually "living room compatible" from the…
Bambu Labs Plate holder with backing to mount with 2 sided tape.
Made these to help my son learn multiplication. Throw the dice and multiply. I didn't come across any die that I liked, so I made my own. Goals: Easy to print Color Options for printing Fun Two options to print. This model is made to…
Building a gigantic Duplo railway network with my son is a lot of fun. However, one thing that repeatedly annoyed me was that the standard train station track plates only allow to build on one side of the tracks. This does not permit to…
fully editable dog/cat tag
Just a dodecahedron made from pentagonal pyramids. I figured since I'd made the Icosahedron I should also do the dodecahedron.
The original housing looked already great, but I needed to create an adapter from female to male with a crossover pin-layout - so I removed the rear part of the original housing, mirrored the other half and put both together to get a…
double sided air duct for original fan
Needed a double sided 1/2" BSP female adapter for an irrigation project so decided to whip one up. Print settings: Requires no supports 0.16 mm layer height 5 walls 6 mm inside and outside brim Print first 5 layers slower to ensure good…
EDIT: some of the outer edge portions were not clearing the lid “lip” at coarse layer heights, so I redesigned them to be slimmer allowing the lid to seal better. These have SNUG at the end of the filename. So I originally had the HDX…
Fünfeckige Dose vier verschiedene Höhen ………………… Pentagonal five sided box four different hights
Normal 16mm by 16 mm die.
throw knife spinner all you need is a 608 bearing :D very sharp (ages 9+) public domain ;] print and enjoy :]
Intended for printing with 0.2mm layers with color swaps on the fourth and seventh layer. No supports are needed (The bridging in the lower letters should be negligible, but scaling the tab up might cause some droop) The split ring can be…
This small key, designed to attach to a keychain, is specifically made to open yellow trash bins with a triangular (3-sided) lock. Its compact design, complete with a hole for easy attachment, allows it to fit seamlessly among your…
Found a bloody drip deco and made it double sided for extra grip, great for stairs.
Inspired by the hanger I use for my scuba regulator and accessories; this design came about after a hammock camping trip where I misplaced my flashlight and car keys in the middle of the night—leading to some panic and a very poor night's…
I designed this double sided phone holder, one side designed for use either at your desk/table and the other side is almost vertical (for watching your phone while lying down, haha). Model does not have the logo, I added later.
Make a huge D20 using those faces, popsicle sticks and the hubs from Hub for Popsicle Stick Icosahedron I've tried many ways of modeling the faces, and ended up with this “springy” version to account for the small differences in popsicle…
This math board provides a simple and visual way to practice counting and arithmetic using red and blue two-sided flip counters. Depending on the file, the board is designed for number ranges of 1-10, 1–20, 1–50 or 1–100 . The counters…
Helldivers keychain, 2-color .3mf
Based on the idea of MPCNC Dual andstop ( https://www.thingiverse.com/thing:2847042 ) I created this thing to have the two endstop for XY axis attached to the rollerplate, so that I can have stepper motor and endstop wires inside drag…
100% infill for best balance and clarity (but if using opaque filament, a different pattern will be fine if balanced). When printing with 100% infill, I had to use .9 extrusion multiplier or print two at a time to equalize pressure…
Have you ever forgot your protractor to class, well you can stop that now with this simple print. (btw the one in the photos is the small one) What you may need: - 3D printer (lol) - Filament - Keychain ring Reccccccomended: - Ironing…
A spacer that can be used for different construction applications. It has 2mm, 3mm, 4mm, 5mm, and 6mm sides.
It's a backscratcher with two settings - one side for gentle scratching, and one side for manly men who want to remove some skin. Comes in 3 different lengths for any size printer, but feel free to use the STEP to make your own. Can be…
This is an accessory to my 12-Sided Tower design: https://www.thingiverse.com/thing:2392279 A simple balcony for elevated sections with doorways. It fits snugly on the door ledge and braces against the lower floor. EDIT: 6/25/17- Added…
2-sided thread printable and works! (Flip the model on the right side before printing!)
Double-sided Avengers keychain One model is printed in one piece The other requires gluing Check out my other models dwustrony brelok z Avengers jeden model do wydruku w jednym kawałku drugi natomiast do sklejenia zapraszam do sprawdzenia…
Simple padlock with compliant mechanism for latch operation. It fits common household door key. Use PLA. Print 0.2 mm layer. Supports needed only for key. place the key flat.
I loved the Multiboard mount made by @BrettHampton_325208 for Ikea RÅSKOG and RÅSHULT utility carts, but I found the regular snaps used in the original model to be a bit too loose for my taste. With this remix the boards stay on tight…
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
It's a backscratcher with two settings - one side for gentle scratching, and one side for manly men who want to remove some skin. Comes in 3 different lengths for any size printer, but feel free to use the STEP to make your own. Can be…
My main recommendation is to use a seam painter for the outside of the jig, otherwise it left a raised area inside each arc.
This ID Holder is double-sided and will fit standard IDs or card sizes. The model is recommended to be printed in PLA, PETG or ABS and does not require supports. I hope you enjoy the design and please comment if you have any issues or…
Remixed Leaf 1 coaster to be double-sided. Printing without supports.
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
This model is compatible with the lego system.
2 sided - Polaroid Photo frame , print standing, tree support, stands by itself, on canva try cool text to put onder your frame (download as .svg and transparant background).
Sony double sided NP-F550 dummy for mounting things together (Like a monitor and a wireless reciever)
18 pin single sided edge connector, in my purpose was for the display driver board for Williams system 3-7 games.
Prints in 62 pieces (31 in each color) and assembles with glue sandwiched between the two color layers. I used PLA Gloop. Hangs on the wall with 5 large beehive hangers: https://a.co/d/e7QzTLL Requires glue and clamps for assembly Bambu…
I needed to repot my long suffering orchid, as it's health was deteriorating due to being in rubbish media. I'm not sure if they really need a transparent pot but the roots are green and I have transparent filament so why not? I created…
Found a bloody drip deco and made it double sided for extra grip, great for stairs.
This is a universal 5-sided (pentagon) service key with an AF measurement of 4.90 mm. It was modeled from the dimensions of a commonly used commercial cooler/service key and may fit various equipment that uses this lock type. This model…
Use two 6x3 (voron spec) magnets on each hole. Check the polarity of the magnets carefully. Use a double sided tape to mount on to the wall. I used PETG filament but any filament should be OK.
This is just a simple model to mount 11.5mm wide Velcro to a surface, one version for double sided tape or countersunk screws. I designed this to be printed at an angle as I wanted the "top plate" of the velcro part to be smaller than the…
Ready to print, no supports. Thanks to fns270 for the great design! Go check out his other models. fns720: https://www.printables.com/@fns720
20 sided dice ready for your flare. Paint your numbers and its ready to game
3D printable AR-15 stripped lower laser engraving jig modeled after a stripped Anderson lower. Mil-spec compatible , uses 6.5mm holes for secure lock-up and lets you engrave both sides without re-positioning . Includes STL + 3MF . AR-15…
Soporte para Damp Duster para pegar con cinta de doble cara en cualquier superficie. Incluye agujeros para ventilar/drenar la humedad y un marco para disimular la cinta de doble cara de 1mm de grosor. Hecho en PETG aunque se puede usar…
This is a minimal double-sided over-the-door hook designed to be used on both sides of a door at the same time . The hook clips over the top edge of the door and provides a hanger on each side, making better use of otherwise wasted space.…
A simple pen stand that will make your desk stand out. The upper diameter of the hole is 20mm. I recommend printing with a small layer for a nicer look.
Its a dice that I made for my IT class in 7th grade and now I'm just posting it. It might not print right tho BEcuse it might need suports.
ENG Both parts of the pendant need to be glued together with plastic glue. CZ Obě části přívěšku je potřeba slepit dohromady lepidlem na plast.
Lost the die(s) to your favorite board game? -no problem. you can now play you board game with a 3D printed die(s).
Could not find a 10-sided dice with dots instead of numbers - so here is my version it's about 50x50mm. Best printed on one side. If you dual colour print, I used edge fill in slicer as fastest method to colour. Step uploaded for…
Very small towel hook, designed to be attached with double sided tape. I couldn't find one like this so I made it. Strong double sided tape will have absolutely no problems holding one towel. Most models used screw - and it does not seem…
It provides greater precision and enhanced rigidity to the Y-axis, resulting in improved stability and more accurate
It is just the FIller Guide that has the mount on both ends. This is useful for overhead feeders that span the top of your printer. Made it cause I'm working on I made an overhead feeder for printing TPU in my Flashforge A5MP Following…
I wanted a two-sided marker (for 'Grimdark Future' activation tokens, for 'Othello', etc) Of course, a flat cylinder would be simplest but I wanted to challenge myself for something a bit more premium feeling: a 'worry stone' dip fuzzy…
Recommend petg as it has more ellasticity
I have this one mounted with M3 Tape. Mounds really well. The Peg needs some support for printing, otherwise quite easy.
This is a quick remix of the base component for the "Skadis one sided paper towel holder" by Ivan Urbánek that extends the length of the arm to support the larger diameter "Mega-size" paper towel rolls. It attempts to stay true to the…
2-sided thread printable and works! (Flip the model on the right side before printing!)
Double sided office wall hook for bag. I recommended use 4 and more perimeters
Now create your flat, multi-colored, double-sided keychain with your own text or logo by embedding text or an SVG into the keychain with 0,6 mm thick. The plate consists of two elements. These can be printed in two colors, just like the…
Now create your flat, multi-colored, double-sided keychain with your own text or logo by embedding text or an SVG into the keychain with 0,6 mm thick. The plate consists of two elements. These can be printed in two colors, just like the…
Basic servo arm/horn that I remixed in a few minutes for all of your dual-armed needs! Surprised that there wasn't a model like this already considering how easy it was for me to make, but hey, there is now one of these ready for your…
A spacer that can be used for different construction applications. It has 2mm, 3mm, 4mm, 5mm, and 6mm sides.
Needed a double sided 1/2" BSP female adapter for an irrigation project so decided to whip one up. Print settings: Requires no supports 0.16 mm layer height 5 walls 6 mm inside and outside brim Print first 5 layers slower to ensure good…
D12 Dice (12 Sided Dice) with 12 musical note names. The notes "H" and "B/A#" are used, as in classical music in Poland, Germany, and other Central European countries. Kostka K12 z polskimi nazwami nut. Category: Learning
Scrapper with two different sized sides. Made to help the cleanup of my Tero countertop composter / food recycler. I recommend printing in PETG or PCTG.
100% infill for best balance and clarity (but if using opaque filament, a different pattern will be fine if balanced). When printing with 100% infill, I had to use .9 extrusion multiplier or print two at a time to equalize pressure…
Simple Wall Hook to use on wall with doublesided tape - for example if you got no nails or you don't want to drill.
I used this model to secure the routing of a Gardena 13mm (innerdiameter) tube. The holder is attached with double-sided adhesive tape (width 19mm) and the tube is attached with two zipties (width 4,8mm).
This is a set of connector walkways and bridge parts to connect 12-Sided Towers at a longer distance than the first bridge. It is completely modular and the same heights as the floors for the building so it all builds off the original.…
This is a staired bridge that crosses the span of two towers (about 6" apart) and one floor in height. I've printed a prototype already with custom supports. I've added my latest version with and without supports. I will post a make once…
This is an accessory to my 12-Sided Tower design: https://www.thingiverse.com/thing:2392279 A bridge to connect elevations of two towers. Slides in place and is supported by each doorway and the lower floors. You need two rails to one…
This is an accessory to my 12-Sided Tower design: https://www.thingiverse.com/thing:2392279 A simple balcony for elevated sections with doorways. It fits snugly on the door ledge and braces against the lower floor. EDIT: 6/25/17- Added…
This is an accessory to my 12-Sided Tower design: https://www.thingiverse.com/thing:2392279 I wanted to make a piece with a working door. This can be inserted so it opens to the left or right. It only opens inward. EDIT:7/1/17- I made…
I wanted to make a modular tower that I could print and possibly re-arrange later if the need arose. I could probably (and may eventually) do other polygons, but for now I have a 12-Sided tower that can be built as high as you're willing…
Single-sided keychain with the MARVEL logo Check out my other models. jednostronny brelok z logiem MARVEL zapraszam do sprawdzenia innych moich modeli
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
