Thermostat for fan in enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder with connect box for thermostat for use in enclosures etc
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The print is designed specifically for the Schneider Electric Thermostat ClimaSys CC
There are two versions of the print. One version with connect box for WAGO Connector and one version for 4 Connector Strip.
It is designed for 2x0.75mm2 flat wire (H03VVH2-F).
Necessary materials:
- Schneider Electric Thermostat ClimaSys CC (NSYCCOTHO)
- Set of 4 Connector Strip (~3A/ 4mm2) or WAGO 2-wire connector (221-412)
- 1 screw M4 x 10mm, M4 nut and washer
Note:
The print is for electrical installation and is therefore designed with a focus on safety, but it is not approved by any authority and there is no declaration for compliance with any kind of technical standard. The use of this print is entirely at your own risk.