flipping face shield - Highly flexible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This dynamic face shield designed by us to overcome the problem of temporarily removing the Faceshield by flipping it…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 226
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This dynamic face shield designed by us to overcome the problem of temporarily removing the Faceshield by flipping it over the head without removing it.
the design is done to accommodate landscape A4 transparent sheet using punching tool 888 size (4 holes, side two holes are 80 mm apart and 888 scale lip of the two holes punching).
Print instructions
If you use the 3mf file attached, you will find both parts, just shift either (Head_band or Visor_band) set to the print bed and click slice then send to the printer, repeat the process for the other part set.
Note: The "Head_band" part consists of 15 pcs in one print, and the "Visor_band" part consists of 15 pcs in one print too.
2mm thick band.
This design uses 1/2 of RC3 material.
Serve the community!