Nose Flute - Extended range
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation on Sebastian650's nose flute
- Ocena
- 4,9 / 5
- Polubienia
- 52
- Pobrania
- 551
- Wydruki
- 11
- Wyświetlenia
- 2174
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a variation on Sebastian650's excellent nose flute design. I used meshmixer to make the mouth of the flute narrower, which allows much higher notes to be played.
Here's a table showing the range I can achieve with each model.
The “lowest note” indicates the lowest note playable.
The “highest clean note” indicates the highest note where a hiss from turbulence doesn't occur.
The “highest practical note” indicates the highest note that can be played at reasonable volume. It is possible to play much higher by simply playing much louder.
| Model \ Limit | Lowest note | Highest clean note | Highest practical note |
|---|---|---|---|
| Original (4.8mm mouth) | F#4 (~370Hz) | G#5 (~831Hz) | G6 (~1568Hz) |
| 3.3mm mouth | F#4 (~370Hz) | E6 (~1319Hz) | G7 (~3136Hz) |
| 2.5mm mouth | F4 (~349Hz) | C7 (~2093Hz) | D8 (~4696Hz) |
Playing tips:
Higher notes require much less airflow for the same volume. This makes it harder to be consistent on volume and tone. Also, for lower notes, a narrower mouth reduces the range of airflow at which a note is produced much. This makes the 2.5mm model a lot harder to play at first, but I've gotten used to it after a few days. An improvement on this design would be to constrict the air passage above the labium, so that breath control is easier.
To achieve the lowest note, make sure your lower lip rests as low as possible on the flute, even under it.