1 / 4
Apple AirTag Dog Collar - Low profile, sealed, and durable — zdjęcie 1
1 / 4

Apple AirTag Dog Collar - Low profile, sealed, and durable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This AirTag is a low-profile, very strong, and durable housing. There are a few key differences: 1.) All layers…

Ocena
0 / 5
Polubienia
7
Pobrania
53
Wydruki
1
Wyświetlenia
566
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This AirTag is a low-profile, very strong, and durable housing. There are a few key differences:

1.) All layers aligned for optimal printing and strength

2,) Sewing it into the collar with nylon thread prevents loss of AirTag during rough & tumble play. The sewing also eliminated the 90-degree angle needed to attach in-line to collar and prevents layer weakness from snapping the design (this is the biggest problem of in-line FDM printing of other designs)

3.) AirTag is inserted during the printing process and seals it in. In a year when the battery dies, just break open the case and re-print. Check your slicer at what height the dome roof layer is printed and insert a change filament command. This is easy with Prusa slicer and Cura with plugin. You could also just watch it since it's a fast print and manually pause the print, insert AirTag, then continue print.

Print Settings

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: PolyMaker PLA

Category: Pets

Tagi