Apple AirTag Dog Collar - Low profile, sealed, and durable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This AirTag is a low-profile, very strong, and durable housing. There are a few key differences: 1.) All layers…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 53
- Makes
- 1
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This AirTag is a low-profile, very strong, and durable housing. There are a few key differences:
1.) All layers aligned for optimal printing and strength
2,) Sewing it into the collar with nylon thread prevents loss of AirTag during rough & tumble play. The sewing also eliminated the 90-degree angle needed to attach in-line to collar and prevents layer weakness from snapping the design (this is the biggest problem of in-line FDM printing of other designs)
3.) AirTag is inserted during the printing process and seals it in. In a year when the battery dies, just break open the case and re-print. Check your slicer at what height the dome roof layer is printed and insert a change filament command. This is easy with Prusa slicer and Cura with plugin. You could also just watch it since it's a fast print and manually pause the print, insert AirTag, then continue print.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Pets