Coral Rock Thing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coral-esque sculpture made for my fish tank.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 292
- Wydruki
- 0
- Wyświetlenia
- 1174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Was experimenting with Blender Geometry Nodes and decided I liked the model so I printed one for my fish tank.
The print requires supports.
The object is fairly large (~180x190mm), so you could print it at 80% scale or smaller, depending on the desired size. At 100% scale it took quite a while, but it printed well.
The attached STL file is the raw object. To get a printable model use your slicer to cut the bottom off (I cut it at ~65mm). You can rotate it prior to cutting to get a different variation on the model. The attached 3MF is cut to make the bottom flat.
Printed with SUNLU Rainbow Silk PLA+ at 0.3mm layer height.