Coral Rock Thing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coral-esque sculpture made for my fish tank.
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 292
- Makes
- 0
- Views
- 1,174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Was experimenting with Blender Geometry Nodes and decided I liked the model so I printed one for my fish tank.
The print requires supports.
The object is fairly large (~180x190mm), so you could print it at 80% scale or smaller, depending on the desired size. At 100% scale it took quite a while, but it printed well.
The attached STL file is the raw object. To get a printable model use your slicer to cut the bottom off (I cut it at ~65mm). You can rotate it prior to cutting to get a different variation on the model. The attached 3MF is cut to make the bottom flat.
Printed with SUNLU Rainbow Silk PLA+ at 0.3mm layer height.