1 / 6
Snap fit case for Gravitrax lift with PWM and USB
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap fit case for installing a PWM and a Micro USB board to power a Gravitrax Lift (5 V Motor)
- Ocena
- 4,5 / 5
- Polubienia
- 17
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 1114
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (35)Powiązane
Just a small case to mount a PWM and a USB Board for powering a motor (in this case a gravitrax lift. No more fiddling with a battery case or empty batteries. Just plug in your existing micro usb power supply and let your kids control how fast the lift is going.
My components:
- https://www.amazon.de/gp/product/B07RDHNL9H (Micro USB Breakout Boards)
- https://www.amazon.de/gp/product/B08Y5L8HFB (PWM / Drehzahlsteller)
- https://www.amazon.de/gp/product/B081JNKDJB (DC 6V 70 RPM Motor GA12-N20)
- 3mm Screws for mounting electronic parts. No inserts, just screw them in.
The fantastic modular lift (you can use any other if you like):
- https://www.thingiverse.com/thing:4751904 (Marble track - Motorized Lift 2021 version (v4))
Notes:
- the PWM also has a real “off” setting (just turn the knob full to the left).
- the PWM shows if it's “on” or “off” (status LED)
- the pictures display my first version. I added a small hole for the status LED later, which is included in the model here.
- printed without support.