Playmobil Alex's motocross fork replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the front wheel fork and handlebars on the Playmobil motocross toy #9357.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 897
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
My son's motocross toy lost one of its handlebars, so I figured it would be a nice exercise for me to try and recreate it from scratch. This is the toy in question: https://playmobil.fandom.com/wiki/9357_Motocross_Driver
The measurements in the SCAD file where all done using calipers and test fitted as shown in the image above. In the print shown in the image, the handlebars are a tiny bit too far from the arms of the figure, but I've made a slight correction in the attached STL.
I used PLA and 0.1 detail print with supports, which took about an hour and minimal material. The supports are a bit annoying, but I couldn't figure out how best to turn it to minimize overhangs. I guess easiest thing to do would be to cut the model into several parts (eg remove handlebars and insert/glue them later), but maybe someone else can figure out other ways of supportless printing.
One thing to note is that PLA is quite brittle for such small parts, but on the other hand you can always try different materials or simply print it again if it ever breaks.