Backyard Discovery Oakmont Swingset Door Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset (https://www.backyarddiscovery.com/products/oakmont-wooden-swing-set) got broken so this a replacement part. It fits perfect and is twice as thick as the original so it should hold up pretty well.
This might fit other Backyard Discovery wooden swingsets that have a door. The mating part is a 0.27"/6.88mm square recess, held in with a countersunk wood screw from the handle side that threads into the knob.
Print Settings
Printer:
Folger Tech Prusa i3 2020
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Notes:
Print with the handle facing up, supports are a must. Printed fine for me with Gizmodorks PLA at 195ºC with a 60ºC bed on blue tape.
Remove the supports and screw onto the original handle with the original screw.
How I Designed This
Designed in Inventor 2015, modeled after the original part but made thicker.
Category: Outdoor & Garden