1 / 4
Backyard Discovery Oakmont Swingset Door Latch — image 1
1 / 4

Backyard Discovery Oakmont Swingset Door Latch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset…

Rating
0 / 5
Likes
3
Downloads
30
Makes
0
Views
178
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset (https://www.backyarddiscovery.com/products/oakmont-wooden-swing-set) got broken so this a replacement part. It fits perfect and is twice as thick as the original so it should hold up pretty well.

This might fit other Backyard Discovery wooden swingsets that have a door. The mating part is a 0.27"/6.88mm square recess, held in with a countersunk wood screw from the handle side that threads into the knob.

Print Settings

Printer:

Folger Tech Prusa i3 2020

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

50%


Notes:

Print with the handle facing up, supports are a must. Printed fine for me with Gizmodorks PLA at 195ºC with a 60ºC bed on blue tape.

Post-Printing =============

Remove the supports and screw onto the original handle with the original screw.

How I Designed This

Designed in Inventor 2015, modeled after the original part but made thicker.

Category: Outdoor & Garden

Tags