osVAC female connector template: minimalistic, short and leak tight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simplified and short version of the female osVAC adapter to use in your own designs. I included the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simplified and short version of the female osVAC adapter to use in your own designs. I included the Fusion360 and step files so you can modify the adapter as needed.
The leak tight fit is achieved by adding a 37x32x2.5mm O-ring (cheap one from amazon). If you don't have an O-ring, this will behave like the standard osVAC connector.
*Edit after user comment: if you use a nozzle diameter larger than 0.4mm or an increased extrusion width, adapt the settings to ensure a dual line perimeter in the thin section as described in the last image.
Category: Tools
